Oil instrument
Recommend Oil instrument
Hot Oil instrument
ZCA2010 portable particle counter (microscope)
Source：Shandong Ketong Author：Shandong Ketong Date：2020-03-17 Visits：678
型号：
品牌：
产地：
价格：
Zca2010 portable particle counter (microscope method)
Zca2010 portable particle counter (microscope method) is an upgraded product of zca, which has the advantages of simple use, economy and durability. It is widely used in the on-site inspection of the cleanliness of hydraulic oil, lubricating oil and water glycol fire-resistant liquid. The inspection cleanliness is intuitive and easy to read. It can help maintenance engineers to judge the nature of oil pollutants and the source of pollutants. It is the necessary inspection equipment for modern factory maintenance.
Instrument characteristics
◆ suitable for dl432-92 method requirements
◆ accurate visual inspection of 5-150 μ m particle pollution
◆ clear particle composition, rapid analysis of pollution level
◆ easy to operate, fast and applicable
To configure
The suitcase
◆ dispensing bottle, solvent
Tweezers
◆ funnel and filter base
◆ stuffing in the box
Sampling in oil tank
When sampling from the oil tank or sump, first insert one end of the hose into the round mouth protruding from the vacuum pump, push the hose forward until it extends from the bottom of the vacuum pump and tighten the end cap (clockwise), then screw the collecting bottle onto the vacuum pump, insert the other end of the hose into half of the liquid level in the oil and start to operate the vacuum pump. When the liquid level in the bottle reaches 2 / 3, put the bottle from the vacuum pump Screw it up and down, pour the liquid into the liquid collecting tank, screw on the second sampling bottle, take out the second liquid sample, take off the sampling bottle cap and put on the bottle cap.
2.2 do not damage hose connection or pipe fitting for sampling
Sampling in oil tank
When sampling from the oil tank or sump, first insert one end of the hose into the round mouth protruding from the vacuum pump, push the hose forward until it extends from the bottom of the vacuum pump and tighten the end cap (clockwise), then screw the collecting bottle onto the vacuum pump, insert the other end of the hose into half of the liquid level in the oil and start to operate the vacuum pump. When the liquid level in the bottle reaches 2 / 3, put the bottle from the vacuum pump Screw it up and down, pour the liquid into the liquid collecting tank, screw on the second sampling bottle, take out the second liquid sample, take off the sampling bottle cap and put on the bottle cap.
2.2 do not damage hose connection or pipe fitting for sampling
Sampling in oil tank
When sampling from the oil tank or sump, first insert one end of the hose into the round mouth protruding from the vacuum pump, push the hose forward until it extends from the bottom of the vacuum pump and tighten the end cap (clockwise), then screw the collecting bottle onto the vacuum pump, insert the other end of the hose into half of the liquid level in the oil and start to operate the vacuum pump. When the liquid level in the bottle reaches 2 / 3, put the bottle from the vacuum pump Screw it up and down, pour the liquid into the liquid collecting tank, screw on the second sampling bottle, take out the second liquid sample, take off the sampling bottle cap and put on the bottle cap.
2.2 do not damage hose connection or pipe fitting for sampling
On a Oil instrument：Kxs3304 multifunctional liquid phase corrosion automatic tester
The next Oil instrument：KKQ2300RC1.2 Transformer Oil Furfural Content Analysis System
